600 | 800 | 1000 | 1200 | 1400 | 1600 | 1800 | |
---|---|---|---|---|---|---|---|
Material width | 650 mm | 850 mm | 1.050 mm | 1.250 mm | 1.450 mm | 1.650 mm | 1.850 mm |
Printing width | 620 mm | 820 mm | 1.020 mm | 1.220 mm | 1.420 mm | 1.620 mm | 1.820 mm |
Printing repeat | 260/600 | 350(400)/850 – 450/1.200 | |||||
Printing units | 4 – 6 – 8 | ||||||
Printing possibilities | 4+0 / 3+1 / 2+2 – 6+0 / 5+1 / 4+2 / 3+3 – 8+0 / 7+1 / 6+2 / 5+3 / 4+4 | ||||||
Working speed | 300 m/min | ||||||
Diameter of the reels | 800 – 1.000 – 1.200 mm | ||||||
Optional accessories |
|
ARES-C, stack-type flexography press suitable for printing on both sides of plastic, paper and composite materials.
Some characteristics that make the ARES-C a machine with high technological features and easy handing are the shaftless transmission, the register prepositioning and the quick change of the sleeves.
Drying unit composed of high performance screens between the printing units and horizontal tunnel located on the upper bridge. Air heating by electrical resistances, thermal oil or gas.
Unwinder and rewinder based on a simple or twin station with semiautomatic change or completely automatic change.
Touch screen for the centralized control of all the parameters in the machine.
Printing units equipped with transmission by servomotors, pre-positioning system of longitudinal register, change of the sleeve plate-cylinders and anilox type cantilever, closed chamber doctor blades, anilox or inking cylinder without the intervention of the operator and motorized slow rotation of the anilox roller. Motorized approaching of the printing units to the working position according to the printing repeat.