Flexography
ARES-C II
See images
Data sheet
| 600 | 800 | 1000 | 1200 | 1400 | |||
|---|---|---|---|---|---|---|---|
| Web width | 650 mm | 850 mm | 1.050 mm | 1.250 mm | 1.450 mm | ||
| Printing width | 620 mm | 820 mm | 1.020 mm | 1.220 mm | 1.420 mm | ||
| Printing repeat | 260/600 mm | 350 (400)/850 mm – 450/1.200 mm | |||||
| Number of colours | 4 – 6 – 8 | ||||||
| Printing possibilities | 4+0 / 3+1 / 2+2 – 6+0 / 5+1 / 4+2 / 3+3 – 8+0 / 7+1 / 6+2 / 5+3 / 4+4 | ||||||
| Printing speed | 300 m/min | ||||||
| Maximum reel diameter | 800 – 1.000 – 1.200 mm | ||||||
| Additional equipment | Longitudinal and transversal register system Automatic pressure control Automatic cleaning system Web guide system Web inspection system Viscosity control system |
||||||
• Other demands upon request
Characteristics
ARES-C II offers a high printing quality and double-sided printing in a single pass, job changeovers in just a few seconds or the use of servomotors technology on the plate, anilox and impression cylinders.
• Cantilever-mounted axes for quick changeovers of plate and anilox sleeves, with pneumatic closures of automatic opening, without tools. No gear changes are required for printing repeat changeovers.
• Preparation of the available printing groups for the following job while the machine is in production mode, allowing to make a job change without stopping the machine.
• Positionning and pressure adjustment of the impression roller, plate cylinder and anilox are done through servomotors. Automatic positionning adjustment according to printing job requirements.
• Longitudinal register through servomotor of the plate cylinder, allowing infinited and unrestricted adjustment.
• Inking system by closed chamber doctor blades, with pneumatic pressure regulation.
• The control panel features an industrial PC with an integrated touchscreen display, allowing centralized control and bringing together all the necessary controls for operating the machine.
• Drying system with two drying zones. Module for drying between the printing units and an horizontal tunnel with high efficiency ensuring material drying before rewinding.
• It can be equipped with fully automatic unwinders and rewinders, or stopped reel.
• Equipment for solvent-based, water-based or UV-curable lacquering or coating can be incorporated to be registered with the printing.
Gallery
